SR-30T (30,000 Btu) When heating large areas, the SR-30T quickly fill rooms with 30,000 Btu of radiant warmth at the touch of a button. The thermostat on the SR-30T offers you round-the-clock comfort and convenience. Made in the USA.
Here is how the thermostat works:
The SR-30T has an input of 30,000 BTU. The hydraulic thermostat bulb is located at the casing assembly bottom. When the hydraulic thermostat bulb senses the need for heat, the unit cycles ON at a full input rate of 30,000 BTU. The unit remains at this full input rate until the hydraulic thermostat bulb is satisfied. When the hydraulic thermostat bulb is satisfied the burner will shut OFF with the pilot flame remaining ON.
The burner does not modulate between ON and the pilot flame. When the SR-30T is ON, all five ceramic plaques will glow. There will never be a time when only one or three ceramic plaques are glowing.
The LO and HI setting has temperature range of approximately 55°F to 90°F respectively. This is the temperature at the hydraulic thermostat bulb not the room temperature. The owner is advised to determine the particular heat setting that is desired for comfort, as heating requirements are different for every owner.
Features:
- 99.9 Percent Efficient
- 30K BTU Infrared Radiant Burner
- Auto Shut-off Safety Control
- Hydraulic Thermostatic Control
- Matchless Piezo Ignition
- Available for Propane or Natural Gas
- No Electricity Required For Heat
- Mounts on Wall or Floor with optional floor stand
- Optional Automatic Thermostat Controlled Blower
- White Exterior Color
- 5-year Limited Warranty
- Made in USA
